We live in a fast-paced world, where everything needs to be done in the shortest time possible. At the same time, we also demand quality work. The same rule applies to cleaning the furnace system as well. But have you wondered about the time duration for cleaning the furnace system?
Many homeowners assume the furnace cleaning process may take the whole day or at least covers half the day. It is hard to tell the time duration of the cleaning process as it differs from one technician to the other. It also depends upon other factors such as house design, furnace system condition, the proficiency of the technician, and many more.
To complete the furnace tune-up Buffalo, NY in the shortest time is not important. What is important here is quality and perfection. You may find many technicians who will promise to wind up the tune-up process as soon as possible. But is it worth it? Is the work satisfactory? The services of these persons will only last for a few days or weeks. And then, your appliance will start giving the issues again.
You can live peace of mind and stress-free days only if your HVAC contractor Buffalo NY does the following important furnace maintenance tasks. They are as follows.
Table of Contents
Clean and Inspect the Blower Assembly
The blower assembly comprises the fan, motor, and squirrel cage. Your technician must remove it from the furnace system, and inspect the parts thoroughly. They must verify that the parts are in perfect condition.
Besides, your contractor must use the right cleaning tools like a toothbrush, vacuum, or paintbrush. The toothbrush will clean in-between the fan blades, the vacuum will clean the blower cabinet and the paintbrush will dust off blower housing and other related parts.
Clean or Replace the Air Filters
Do you know that the heart of the furnace system is the air filter? The system will fail in its basic operation and efficiency, if the air filters are dirty, clogged, and dusty which leads to more energy consumption, thereby reducing the life of the furnace.
The air filters are the first parts that the technician inspects during the cleaning process. If it is found dirty, they will clean it. If it is worn out, then they will replace it with the better ones.
Pull and Clean the Burners
The common issue with the burners is misalignment and contamination. The technician must inspect the burners and make sure they are free from all kinds of dust and debris. This will guarantee the safety and provide smooth and efficient airflow.
To clean the burner, the technician must use a stiff-bristled brush to clean the soot or superficial rust from the burner face. They can also use dry nitrogen or air pressure to blow in the burners and in the vestibule area.
Inspect the Heat Exchanger
Inspecting the heat exchanger is an important task and also the simplest task. An experienced professional can easily identify defects or issues by just looking at them. If not, they can use dye penetration inspection systems and inspection cameras to inspect for holes and rust.
Check the Igniter
The technician must measure the resistance through the igniter. If the furnace is a silicon nitride igniter, then you must see 11-17 ohms. If it is a carbide igniter, then it should be 50-100 ohms.
If you find the readings above the specified parameters, then haste to replace the ignitor.
Inspect the Flame Sensor
Your HVAC contractor must check the flame sensor and guarantee it to be in its best condition. It must run perfectly without being in any compromising situations. Ignoring this will give place to dangerous circumstances like fire and more. The reading of the furnace sensor must be 1.5 to 4 uA.
Therefore, when it comes to furnace tune-up, make sure to call a certified and licensed professional, as the safety of the furnace will guarantee the safety of your loved ones.
If you are looking for the best and finest furnace tune up Buffalo, NY, then contact the professionals who are high in experience, knowledge, and customer service. This indicates to Smart Home Heating and Cooling, the best service provider in and around Buffalo, NY.